Warranty

Warranty 

“WE’VE GOT YOUR BACK” 

3 YEAR GUARANTEE 

Pave Tool Innovators (PTI) built its reputation by engineering products that exceed consumer expectations for quality and durability.  Our 3-year warranty covers all mechanical PTI tools from manufacturing defects* in materials and workmanship for PTI products and for the original purchaser only.  This warranty is non-transferable. 

PTI will repair or replace at its discretion any manufacturing defect in these products free of charge. The 3-year guarantee does not cover electronic items, normal wear and tear**, misuse, accident, lost, stolen, construction site damage, improper care or cleaning, non-standard usage, collateral damage***, modified, tampered or negligence. Product must be purchased from PTI or an authorized PTI dealer and MUST be returned to PTI for evaluation. 

1 YEAR GUARANTEE (Electronics) 

PTI offers a 1-year warranty on electronic items (EX. Power Pack, Vac Max Vacuum). This 1-year warranty covers electronic equipment from manufacturing defects* in materials and workmanship for PTI product and for the original purchaser only.  This warranty is non-transferable 

PTI will repair or replace at its discretion any manufacturing defect in these products free of charge. The 1-year guarantee (Electronics) does not cover electronics exposed to moisture, misuse, normal wear and tear**, accident, lost, stolen, construction site damage, improper care or cleaning, non-standard usage, collateral damage***, modified, tampered or negligence. Product must be purchased from PTI or an authorized PTI dealer and MUST be returned to PTI for evaluation. 

*MANUFACTURING DEFECTS 

A manufacturing defect exists if the product departs from its intended design. Defective materials or workmanship are covered by the appropriate Guarantee for all PTI tools. 

**WEAR AND TEAR 

Wear and tear are damage that naturally and inevitably occurs as a result of normal use. Moving parts will wear out and protective pads will deteriorate and discolor over time. While we choose the best materials available for the application, all materials degrade over time with use and exposure to the elements.  In addition, bend, lost or broken (not limited to) Cotter Pins, Bolt, Nuts etc... are not under warranty.   

 ***COLLATERAL DAMAGE 

Collateral damage is any physical injury or bodily harm done to job site personnel or bystanders and/or damage to construction materials and equipment present on the job site at the time of claim.  PTI will not be held liable or responsible for such damage as a result of using the tools. It is the sole responsibility of the company owner, job site foreman, and the machine/tool operators to ensure the safety of all workers by fully inspecting the tools & equipment before each use in their entirety.  Pre-use areas of inspection include, but are not limited to, hooks, chains, connections, pins, clamping surfaces, nuts, bolts, pads, welds, knuckles, joints, handles and pressure points for signs of weakness, cracking, crazing, loose connections and general soundness, etc.  Never use a tool that appears to be unsafe, bent, damaged, mounted with worn out straps or rusty old chains.  As with all lifting apparatus, crew safety is the number one concern and every measure possible must be performed to keep your crew safe.  

NEVER, EVER DWELL UNDER A MOVING OR A HOISTED LOAD.  KEEP ALL BODY PARTS FREE AND CLEAR OF DANGER ZONES.  WORKER SAFETY IS ALWAYS #1. 

DOES MY PRODUCT ISSUE QUALIFY FOR WARRANTY COVERAGE? 

Our warranty program covers PTI products that legitimately fail due to a manufacture defect. Use your judgment when assessing whether your product or your customers product is likely to be covered under the guarantee. We do NOT cover products that no longer work due to wear and tear or negligence. See the wear and tear section for details.  We do NOT cover tools if they are modified in any event.  Negligence is application misuse and/or operator exceeding the lifting capacity specified on each tool and in our literature, if you’re unsure, contact our office for support at 1.860-870-8665. If after assessment, PTI determines your product has exceeded its lifetime and deems the returned product ineligible for warranty repair or replacement, we will contact you to discuss available options we may have for you. 

ALWAYS…. 

  • INSPECT LIFTING CLAMPS BEFORE EACH USE 
  • STAY OUT FROM UNDER THE LOAD 
  • KNOW THE LIFTING CAPACITY OF YOUR TOOL 
  • WEAR PROPER HEAD, FOOT, EYE AND EAR PROTECTION. 
  • STAY ALERT & BE PREPARED FOR MISHAPS 
  • MAKE SURE YOUR CLAMP HAS A POSITIVE & SECURE CONNECTION WITH THE LOAD PRIOR TO LIFTING 
  • KEEP YOUR LOAD BALANCED USING BALANCE POINTS 

NEVER…. 

  • USE A TOOL FOR ANYTHING OTHER THAN IT’S INTENDED USE. 
  • USE FRAYED, DAMAGED OR WORN-OUT STRAPS TO ATTACH YOUR CLAMP TO YOUR MACHINE 
  • USE OLD RUSTY CHAINS TO ATTACH YOUR CLAMPS 
  • GET CARELESS OR DIVERT YOUR ATTENTION WHEN LIFTING HEAVY OBJECTS 
  • USE A CLAMP THAT HAS NOT BEEN INSPECTED OR DOES NOT APPEAR SAFE 
  • LIFT MORE THAN THE SPECIFIED WEIGHT CAPACITY 
  • ALLOW THE LOAD TO SWING MORE THAN 10 DEGREES IN EITHER DIRECTION 

 PLEASE NOTE: Return shipments must be prepaid and insured.  Proof of purchase is required by providing receipt to info@pavetool.com. Paver Tool Innovators cannot be liable for lost in-bound packages. We require products to be clean and dry for warranty evaluation. If the claim is determined to be valid, the product will be replaced at Paver Tool Innovators expense within 10 to 15 business days. Any replacements or exchanges will be at the discretion of Paver Tool Innovators, based on the type of product sent in and the availability of replacement styles and colors. Typically, most issues can be resolved with a replacement part.  

Warranty Claim Details.  All fields MUST be included in the same order via email to info@pavetool.com 

  

Description of Tool: _______________________________ 

 Date of Purchase: ________________________________ 

Date of Claim: ___________________________________ 

Dealer Name: ___________________________________ 

Dealer Invoice Number: ___________________________ 

Dealer Representative: ____________________________ 

  

Client Name: ____________________________________ 

Client Company: _________________________________ 

Tool Operator Name: ______________________________ 

Operator Phone Number: __________________________ 

Project ID: ______________________________________ 

Job Site Address: ________________________________________ 

Operator email: __________________________________ 

  

Please describe the stone product being used when the deficiency occurred (i.e. weight, size, name of product, manufacturer of product): ___________________________________________________________________________________________________________________________________________________________________________________________________ 

  

Reason for claim, please be specific in how tool was being used:______________________________________________________________________________________________________________________________________________________________________________________________